H-Series 9hz
431-0003-01-13 rev. 120 Nov 2010
Step 4 – Software Upgrade
In order to upgrade the software on the camera, it is necessary to put the software update file
(swUpdate.tar) onto the SD card, and then boot up the camera with the card inserted in the camera.
If the camera has an existing SD card, and the camera is connected to the computer, the card should
show up as a removable storage drive. As a precaution, you may want to back up any existing files
from the SD card (images and/or videos). Ensure there is sufficient room on the SD card for the
update file (~12.5MB).
If the computer has a separate SD card slot, the card can be inserted into the slot and accessed as a
removable storage drive.
Once the SD card is available on the computer, copy the new software file to the appropriate drive. The
following procedure describes how to upgrade the camera using the USB cable and the SD card in the
camera.
1. Turn the camera on and wait for it to fully boot up
2. Plug the USB cable into the camera and the computer
3. Check to make sure the SD card is available as a removable storage drive. Open up the drive
with Windows Explorer to view files on the SD card. If necessary, temporarily remove the card
from the camera and return it to the SD card slot. Windows should recognize it as a new drive
and open a window to prompt you what you want to do (select “Open folder to view files with
Windows Explorer”).
4. Copy the swUpdate.tar file onto the SD card folder
5. Once the file is copied onto the SD card, turn the camera off. If the card is not in the camera,
insert the card into the camera SD card slot. Unplug the USB cable from the camera and
attach external power to the camera (via the Hot Shoe).
6. Turn the camera on. After the color bars appear, watch the viewfinder for the following prompt:
“Hold Capture Button to start the upgrade”. Continuously hold the capture button until the
camera indicates “Wait for software upgrade to complete…”
7. Once the update is completed, a prompt in the camera’s viewfinder will ask you to shutdown the
camera and reboot. Press and hold the power button to turn off the power.
8. When the camera is booted up, open the Avalon GUI end user tool and verify the “H-Series
Application Version” has changed to the new version number (currently 2.00.02).
(196 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales